International Human Resource Management Essay Example | Topics and Well Written Essays - 1500 words

International Human Resource Management - Essay Example In such circumstances, it becomes difficult for the employees working in foreign countries to cope with culture that drastically varies in almost all aspects of the business (Ronny et al., 2007). This may create stressful impact on the expatriate employees. Hence, it becomes necessary for the organisation to provide necessary cross-cultural training to those employees selected for relocation in the foreign countries (Xu, 2011). Literature Review According to Nikolaeva (2010), it is vital for the organisations to provide and prepare expatriates with extensive training before departure in order to ensure that the expatriates are familiar with the cultural differences between the native and the host country. Accordingly, the author emphasises that proper training is extremely necessary for the expatriates, which should reduce any possibility of cultural shock (Nikolaeva, 2010). As per Scagliotti and Mujtaba (2010), pre-departure training creates a comprehensive support system for the ex patriates and makes them familiar with the foreign culture that extensively helps them to reduce their stress in the foreign land. At the same time, they claim that providing cross-cultural training to the expatriates helps the entire organisation to gain substantial knowledge of the cultural differences between the native and the host nation (Scagliotti and Mujtaba, 2010). According to Morrison and Conaway (2007), the organisation operating internationally may suffer from the cultural shock which may hurt its profitability and render organisational initiatives to be inefficient. Hence, it is necessary for the organisation

Shortage of Nurses Research Paper Example | Topics and Well Written Essays - 2250 words

Shortage of Nurses - Research Paper Example Current global shortage of nursing staff has contributed to an increased number of mortality rates. Causes of nursing staff shortage Shortages of nursing staff have been attributed to various factors; addressing these factors can drastically reduce these shortages. Issues related to these shortages include insufficient enrollment of students into the nursing profession, underinvestment by the involved country’s government into health sectors, high turnover rate, poor working conditions, rapid increase in population, increased incidences of rare diseases, and few number of institutions offering nursing education (Andrist et al, 2006). Insufficient enrolment into nursing Students enrolling for nursing education are far much below to address the existing shortage. According to the survey by international nursing council, the number of students enrolling for the nursing profession is below the expectation to address the shortage of staff, and there is a need to increase the number of intakes. Comparing the number of students enrolling for other faculty and with those entering into nursing, few students pursue nursing profession. Reasons for this low enrollment have been contributed by the poor pay that nurses receive, poor working condition, long working hours, and high cost associated in training. Nurses work hard to improve the quality of patient’s life. Despite deplorable working condition, nurse’s wages are much below, hence shying off many students. Because of shortage in staff, nurses end up working for many hours than expected working hours. Most of institutions offering nursing education charges high fee, increased cost in educating nursing student has led to many parents and guardians to convince their children to pursue other courses that are less costly and have better pay (Cowen & Moorhead, 2011). Another contributing cause of the shortage in the nursing industry is an inability of nursing schools and college to enroll a large numbe r of students. According to America, association of nursing (AAN) there has been regulation in the number of annual intake in nursing college. According AAN, the Regulation in number of students is to avoid flooding the industry with many nurses. Despite an increase in the shortage, colleges have not taken an initiative to increase the number of nurse’s students. In addition, the numbers of institutions and colleges offering nursing training are few. This has translated to reduce in number of students enrolling for nursing (Kalisch, 2004). Underinvestment in health sectors Most of the developing countries have invested a lesser amount of their budget in health sectors. In Philippines, the country invests 3.6% of their gross domestic income to health sectors. This is contrary to what United States invests; it invests 16% of their gross domestic income. Because of this underinvestment, it has been difficult to attain millennium development goal (MDG) where it aimed at reducing child mortality rate and improving maternal health. Because of poor investment, it has led to poor recruitment programs. Less number of nurses are employed annually; this weak recruitment has failed to breach the gab in the existing shortage. In addition, due to less investment, nurses are paid less salary; inadequate wages have shy off many student to pursue nursing, hence causing a shortage of nursing staff (Kalisch, 2004). Poor

Reflective journal Essay Example | Topics and Well Written Essays - 1000 words

Reflective journal - Essay Example Students in this model are required to make sure that the company expands its operations as well as increase its revenue output. Before the process started, the teacher divided the class into different groups which were to compete with each other in business modeling. It was during these groups that I learnt effective decision making processes among other skills as discussed in this paper. How I performed as a member of my team As a member of my team, I performed well and was fully involved in the decision making process. Although it was I was not mandated to perform all the tasks involved in the process, I was engaged in other activities such as conducting research on different topics and issues. The expertise and knowledge of our team leader helped us avoid role conflict among the different team members. Since everybody has different capabilities and abilities, he assigned roles according to our natural talents and interests. He knew the strengths and weaknesses of every member of our team. This skill helped him in allocation of tasks and roles that different people would perform. Not everybody has equal capabilities as we are all naturally different. Therefore, those who were slow were offered support. This helped us in making swift and effective decisions that did not negatively affect our performance. I conducted thorough research for the benefit of the team and as a way of showing my active participation. To be successful, all members of a team should handle their duties cautiously and with seriousness. As such, they should show concern and be fully involved in all the teams’ activities. Different people have different performance levels. While working as a team, it is imperative to understand that all people have different capabilities and have different performance abilities. What I learnt from working in the team Teams are an essential tool for learning from peers as they offer engaged students with different knowledge and skills. Students get a chance to learn from other fellow students. Students also have the opportunity to practice different skills such as communication skills and public relations skills. For a team to be successful there must be the existence of good communication skills and members (Hayes & Hayes 2002, p., 112). Again, they should be able to work together and understand the need for them to be involved in the group. In the whole modeling process, I learnt about teamwork and its importance to people working for a single course and aiming at a common goal. Our goal was emerging the best team after the whole process. We planned to grow the share capital of our company and grow our market share. I learnt that in a team, arriving at a decision took a longer time than when working individually. In a team, there are various options available for the team to exploit in reaching a particular agreement (Adair 2010,  13). Personally, I developed good decision making skills that I find useful all the time. Area s I can improve on in my teamwork For a team to carry out its mandate successfully, it requires a number of factors to work in its favor. First, the team members must agree to pursue a common goal and move towards a similar direction. Our team was able to settle on our strategy and decide on the ways to use so that we could achieve our goal (Bell & Smith 2011,

Osha Assignment Example | Topics and Well Written Essays - 250 words

Osha - Assignment Example It is also charged with the provision of training, relevant education, outreach, and assistance to the work force. All employers, as well as their employees, are covered with the OSHA Act. This coverage may be directly as enshrined in the federal OSHA or through a state program approved by OSHA. Any program rolled out by the state is required to be up to par with the standards stipulated by the federal OSHA in as far health and workplace safety is concerned. The OSHA website stipulates that any individual or groups that represent employees or even the employees they are in a position to lodge a complaint that calls for an inspection by OSHA of their areas of work if they have sufficient reasons to believe that such areas pose great health or safety hazards to them. It also gives directions on how such a complaint may be filed. The OSHA website also has additional information such as their contact information, various statistics and data regarding safety in the workplace, their cooperative programs, their schedule of event, types of hazards as well as the various rights any worker is

Court Case against an Alleged Surface Water Polluter Brought Under Essay

Court Case against an Alleged Surface Water Polluter Brought Under Section 209 of the Water Resources Act (1991) - Essay Example The two Environment Agency (EA) Technical Officers observed and photographed the silt water that spreads across the half of the southern part of the controlled surface water of South Lake. The officers traced the source of the polluting discharge back to trenching excavations that were being carried out by the Ltd Company. The company was in the process of installing a new drinking main water supply for the rainy periods. The starting place of the silty water was the channel that was being dewatered through the pumping out of the water that had accumulated in the channel using an extractor pump (3inch). The conditions at the site were referred to as boggy by the defendant and the surrounding land was characterized as heather and scrubland on the sandy soil. It was then established that about 80,000 litres of water had been pumped to waste. The Environment Agency (EA) officers approached the sites manager and notified him of the offence and the consequences it will bring forth hence the likelihood of a court case. The Environment Agency (EA) officers observed that the silt was making its way by gravity which is 50-60m through a wooded area into a roadside ditch. Pollution discharge followed 170m alongside the B3430 road in the ditch through a silt trap into a 30m length of culvert; this Culvert discharged into Environment Agency (EA) controlled water (stream) which was flowing under the road and then some 370m into South Lake. A series of 5 tripartite samples were taken by the Technical Officers from the channel to the lake. The samples were taken in the way that has been prescribed by Water Resources Act. The samples included those from the pump; when the samples from the pump were taken, the pump was switched off. After collection of the samples, they were moved to the independent reference laboratories and the EA laboratory where an analysis was done and then presented for an independent analysis to the Ltd Company. Ltd Company was informed by the EA Area Pollution Control Manager that the analysis results suggested that an offence was committed and the papers were to be passed to the EA Solicitor for action to be taken in the local Magistrate’s Court. Pollutants The pollutants from the samples analyzed were suspended solids, ammoniacal - N, chloride, pH, BOD (Biochemical Oxygen Demand), total oxidized nitrogen and orthophosphate. Each of the pollutant will be described and its effects indicated. Suspended Solids They are naturally found in water and in its excess they become harmful. The finest particles in the suspended solids cause most of the serious problems. Increase in the suspended solids in water makes the water look cloudy or turbid. When the water becomes cloudy, it limits sunlight reaching the aquatic plants. The effect on the aquatic plants is stunted growth. Fine suspended solids can clog the fish gills and destroy their respiration and that of other aquatic animals (Hill 2010, p245). Sediments can have differing physical and biological effects de pending on the form of the suspended solids. Suspended solids high value reduces the productivity of the systems by shading the macrophytes and algae.

Printmaking Essay Example | Topics and Well Written Essays - 500 words

Printmaking - Essay Example In this cheese printing, the artist engraved a metal plate covered in a resin. Resin is used because it is a material that is acid resistant. After applying the design, the plate is then dipped in an acid that â€Å"bites† the design into a plate, inked, and then pressed with a paper. Here, the artist drew directly on a stone that is very flat or even a special prepared metal plate usually a greasy crayon. The stone is then dampened using water, and then inked. The ink will then be clinged on the greasy crayon marks not on areas that are dampened. After pressing the paper against the stone, the ink found on greasy sections is transferred to it. Here, a specific type of pencil called silk screen is used. This technique was first used in 20th century. Andy Warhol first prepares a stretched screen that is very tight normally of blocks, and silk on areas that need not be printed through filling the mesh of screen using a vanish like substance or any material that would block the fabric pores. The paper is then placed below the screen and ink is forced through the open mesh on the paper. This print making processes is widely used in textile especially in common

Molecular Basis of Disease Lab Report Example | Topics and Well Written Essays - 1500 words

Molecular Basis of Disease - Lab Report Example People lacking the absorption ability of vitamin B12 remain with the disease for the rest of their lives. Parietal cells found in the gastric cells are responsible for production of hydrochloric acid which is important in digestion as it provides a favorable medium for enzyme reaction. The serum found from patients having this disease react with ? and ? sub units. The antibodies are used for diagnostic purposes. This experiment involves testing of serum of antibodies from various patients to determine if they react with the sodium pump which contains ? and ? sub units. This will help in diagnosing pernicious anemia. A mouse is used in this experiment since its stomach structure is similar to that of a man. A primary antibody and a secondary antibody are also used in this experiment as they react with the mouse antigens. Anti proton pump of a human being can also cross react with proteins of the mouse making the mouse a favorable specimen for the experiment. From the experiment we exp ect antibody response to help us diagnose pernicious anemia. Aims The aim of this experiment is to determine whether samples from patients contain antibodies and also to diagnose patients having the disease through Western blotting; Immuno histochemistry using the gastric proton pump. Materials and Methods The materials used includes; SDS polyacrylamide gel (80%, resolving gel 40% upper stacking gel), Gel running buffer (25 mM Tris, pH 5.3, 0.192M Glycerin, 0.1% SDS), Gel apparatus, power supply, mouse stomach protein,5? SDS sample buffer (0.315 Tris, pH 6.8, 25% glycerol 10% SDS, 5% 2-beta mercaptoethanol, 0.025% Bromophenol blue), Protein MW standards, heat block, Gel loading tips, transfer apparatus, transfer buffer (25mM Tris, 192mM glycine,20% methanol), nitrocellulose membrane, filter paper, 0.1% Ponceau in1% acetic acid, 0.1M NaoH, TBS Tris buffered saline, Blocking solution TBS containing 5% skim milk powder. Materials required to obtain a mouse stomach include; a slide cont aining section of mouse stomach, xylene, hemoglobin, acid alcohol, Scott’s tap water, eosin, DPX mounting media and cover slips. Procedure to obtain mouse stomach morphology The slide containing mouse stomach is incubated in xylene and ethanol for two minutes respectively. After this the slide is rinsed in tap water for 30 seconds. The slide is then incubated in the hemoglobin for 2 minutes. The slide is rinsed again in tap water for 30 seconds after which it is placed in 1% acid alcohol for 3 seconds after which it is rinsed again in tap water for 30 seconds. The slide is incubated in Scott’s tap water for 30 seconds after which it is swashed in water for 30 seconds. The slide is then placed in eosin for 4minutes and excess is blotted off by a paper towel. The slide is then placed in 80% ethanol and again 90% after which the slide is incubated in ethanol for 2 minutes then allowed to air dry. A drop of DPX mounting medium is placed on the section and then covered by a cover slip. An observation is made under the microscope and diagrams made as follows. Fig 1 showing a mouse stomach with Haematoxylin To prepare the stomach protein sample, 200Â µl of protein is placed into a microfuge tube and 50Â µl 5? SDS sample buffer is added. The marker and the protein sample tubes are spine for a few seconds to bring the liquid to the bottom of the tube. The MW markers and proteins are then loaded using a special gel loading tips. The apparatus is then connected to a power supply of 200V and run for 1 hour until